3M™ Cushion-Mount™ Plus Plate Mounting Tape E1315H, Yellow, 1372 mm x 23 m, 0.38 mm
- Yellow, flexo plate mounting tape with air release feature with high plate side adhesion
- This 0.015 inch (0.38 mm) yellow, double coated foam tape has the air release feature with high plate side adhesion used to mount flexographic print plates.
- Provides high quality medium-soft combination print. The adhesives remove cleanly from the print plate and the print cylinder or sleeve.
- Flexographic Printing, Flexographic Printers
|
Attribute Name
|
Value
|
|---|---|
|
Adhesive Type
|
Differential Acrylate
|
|
Air Release
|
Yes
|
|
Applications
|
Flexographic Plate Mounting
|
|
Backing Material
|
Polyethylene Foam
|
|
Backing Thickness (metric)
|
0,432 Millimetre
|
|
Composite Sleeves
|
Yes
|
|
Overall Length (Metric)
|
22,86 m
|
|
Overall Width (Metric)
|
1371,6 mm
|
|
Primary Liner
|
Polycoated Polyester
|
|
Print Quality
|
Combination Printing - Medium Soft
|
|
Print Quality (Series)
|
13 Series
|
|
Product Colour
|
Yellow
|
|
Product Form
|
Roll
|
|
Product Key
|
E1315H
|
|
Total Tape Thickness without Liner (metric)
|
0,43 Millimetre
|
|
Urethane Sleeves
|
Yes
|
- Yellow, flexo plate mounting tape with air release feature with high plate side adhesion
- This 0.015 inch (0.38 mm) yellow, double coated foam tape has the air release feature with high plate side adhesion used to mount flexographic print plates.
- Provides high quality medium-soft combination print. The adhesives remove cleanly from the print plate and the print cylinder or sleeve.
- Flexographic Printing, Flexographic Printers
- Cushioned flexographic plate mounting sticky back tape
- Print plates mounted on E1315H will have no air bubbles under the plate due to the air release feature designed into the tape
- Grooves in the adhesive are created by a cross-hatch pattern from the release liner.
- Plate demounts from the double coated cushioned tape without adhesive residue
- Tape also removes cleanly from the sleeve or steel print cylinder
- Flexographic printing, flexographic printers
- Cushioned flexographic plate mounting sticky back foam tape
This 0.015 inch (0.38 mm) yellow, double coated foam tape has the air release feature with high plate side adhesion used to mount flexographic print plates.
Provides high quality medium-soft combination print. The adhesives remove cleanly from the print plate and the print cylinder.
Pošaljite nam poruku
Zahvaljujemo na interesu za 3M. Kako biste nam pomogli da učinkovito upravljamo Vašim upitom i odgovorimo na njega, ljubazno Vas molimo da navedete neke ključne podatke, uključujući Vaše podatke za kontakt. Podaci koje navedete služiti će kako bismo mogli odgovoriti na Vaš zahtjev putem e-pošte ili telefona od strane predstavnika tvrtke 3M ili jednog od naših ovlaštenih poslovnih partnera s kojima bismo mogli podijeliti Vaše osobne podatke, a u skladu s pravilima privatnosti tvrtke 3M.
Hvala vam što ste se obratili tvrtki 3M
Primili smo poruku i trenutno analiziramo vaš upit
Netko od naših predstavnika stupit će s vama u kontakt putem telefona ili e-pošte
An error occurred.
