- Teal, flexo plate mounting tape with air release feature with high plate side adhesion
- This 0.015 inch (0.38 mm) teal, double coated foam tape has the air release feature with high plate side adhesion used to mount flexographic print plates.
- Provides high quality medium-firm combination print. The adhesives remove cleanly from the print plate and the print cylinder.
- Consistent caliper control allows the printer to use multiple foam densities on a print job to optimise print quality
|
Attribute Name
|
Value
|
|---|---|
|
Adhesive Type
|
Differential Acrylate
|
|
Air Release
|
Yes
|
|
Applications
|
Flexographic Plate Mounting
|
|
Backing Material
|
Polyethylene Foam
|
|
Backing Thickness (metric)
|
0,432 Millimetre
|
|
Composite Sleeves
|
Yes
|
|
Overall Width (Metric)
|
1371,6 mm
|
|
Primary Liner
|
Polycoated Polyester
|
|
Print Quality
|
Combination Printing - Medium Firm
|
|
Print Quality (Series)
|
17 Series
|
|
Product Colour
|
Teal
|
|
Product Form
|
Roll
|
|
Product Key
|
E1715H
|
|
Total Tape Thickness without Liner (metric)
|
0,43 Millimetre
|
|
Urethane Sleeves
|
Yes
|
- Teal, flexo plate mounting tape with air release feature with high plate side adhesion
- This 0.015 inch (0.38 mm) teal, double coated foam tape has the air release feature with high plate side adhesion used to mount flexographic print plates.
- Provides high quality medium-firm combination print. The adhesives remove cleanly from the print plate and the print cylinder.
- Consistent caliper control allows the printer to use multiple foam densities on a print job to optimise print quality
- Easy Mount liner, has micro-channels in both adhesive surfaces. The crosshatched pattern allows air to escape from between the tape and cylinder/sleeve and between the tape and plate. The productivity is increased, total handling time is reduced and printing defects are eliminated
- Print plates mounted on E1715H will have no air bubbles under the plate due to the air release feature designed into the tape
- Grooves in the adhesive are created by a cross-hatch pattern from the release liner
- Plate demounts from the double coated cushioned tape without adhesive residue
- Tape also removes cleanly from the sleeve or steel print cylinder
- Flexographic printing, flexographic printers
- Cushioned flexographic plate mounting sticky back foam tape
This 0.015 inch (0.38 mm) teal, double coated foam tape has the air release feature with high plate side adhesion used to mount flexographic print plates.
Provides high quality medium-firm combination print. The adhesives remove cleanly from the print plate and the print cylinder.
Pošaljite nam poruku
Zahvaljujemo na interesu za 3M. Kako biste nam pomogli da učinkovito upravljamo Vašim upitom i odgovorimo na njega, ljubazno Vas molimo da navedete neke ključne podatke, uključujući Vaše podatke za kontakt. Podaci koje navedete služiti će kako bismo mogli odgovoriti na Vaš zahtjev putem e-pošte ili telefona od strane predstavnika tvrtke 3M ili jednog od naših ovlaštenih poslovnih partnera s kojima bismo mogli podijeliti Vaše osobne podatke, a u skladu s pravilima privatnosti tvrtke 3M.
Hvala vam što ste se obratili tvrtki 3M
Primili smo poruku i trenutno analiziramo vaš upit
Netko od naših predstavnika stupit će s vama u kontakt putem telefona ili e-pošte
An error occurred.
