Mount your photopolymer plate to print cylinders with 3M™ Cushion-Mount™ Plus Plate Mounting Tape E1820H. Our 0.51 mm blue, double coated foam tape which has the air release feature with high plate side adhesion. It is used for plates that contain mostly solids in a combination of solid and halftone images.
3M™ Cushion-Mount™ Plus Plate Mounting Tape E1820H with easy mount adhesive and higher plate side adhesive is created for mounting flexographic print plates to cylinders or sleeves. It provides high quality for work containing mostly solids in a combination of solid and halftone images. Our Easy Mount liner creates micro-channels in both adhesive surfaces. The crosshatched pattern creates a continuous and permanent network of micro-channels in the adhesive, allowing air to escape from between the tape and cylinder/sleeve and between the tape and plate. The adhesive on the linered side (plate side) of the tape is designed for mounting photopolymer plates, has excellent holding power on-press and clean plate removal when demounting. The adhesive on the non-linered side (cylinder side) of the tape is designed for mounting to flexographic printing cylinders or sleeves, providing easy application when mounting and clean removability while demounting.
Zahvaljujemo na interesu za 3M. Kako biste nam pomogli da učinkovito upravljamo Vašim upitom i odgovorimo na njega, ljubazno Vas molimo da navedete neke ključne podatke, uključujući Vaše podatke za kontakt. Podaci koje navedete služiti će kako bismo mogli odgovoriti na Vaš zahtjev putem e-pošte ili telefona od strane predstavnika tvrtke 3M ili jednog od naših ovlaštenih poslovnih partnera s kojima bismo mogli podijeliti Vaše osobne podatke, a u skladu s pravilima privatnosti tvrtke 3M.
Primili smo poruku i trenutno analiziramo vaš upit
Netko od naših predstavnika stupit će s vama u kontakt putem telefona ili e-pošte