3M™ Trizact™ Hookit™ Foam Abrasive 8000 Disc 443SA, 75 mm, 8000, 30804
- Part Number 30804
- 3M Product Number 443SA
- 3M ID 7100193763
Details
Highlights
- Eliminate or significantly reduce the compounding process by using 8000-grade 3M™ Trizact™ Hookit™ Foam Abrasive Discs before you polish
- Always used damp, they deliver long life and less loading than dry sanding
- Use 3M™ Trizact™ 8000-grade Foam Discs for refining 3000-grade and finer sand scratches on painted surfaces
- Get a smooth, consistent finish with a sander — spending less time using a heavy polisher
- Reduce your overall finishing time when you use our 8000-grade abrasives with other 3M™ Trizact™ Abrasives and one of the 3M™ Perfect-It™ Paint Finishing Systems
- Compared to traditional finishing, using 3M™ Trizact™ Abrasives for removing sand scratches can reduce the possibility of heavy swirl marks, burn through, and other defects caused by more aggressive processes
- Available in two disc sizes
Shorten or eliminate the compounding stage from your paint finishing process by using 8000-grade 3M™ Trizact™ Hookit™ Foam Abrasive Discs before you polish. Used to refine 3000-grade or finer sand scratches, they leave a surface so smooth you can forget compounding and start polishing. They're the industry's first 8000-grade abrasives — built with a unique patented 3M technology.
Start the finishing process straight away at the polishing stage after using 8000-grade 3M™ Trizact™ Hookit™ Foam Abrasive Discs. They allow body shop technicians to use a lighter sander instead of a heavier polisher for removing 3000-grade and finer sand scratches. These long-lasting discs are designed to refine very fine sand scratches, which were traditionally refined with a compound liquid on a pad. They leave a smooth surface and reduce the risk of swirl marks, burn through, and other defects. In many cases, the technician can eliminate compounding and begin polishing straight away using either 3M's 1-Step Polishing Process or Random Orbital Polishing Process. 3M™ Trizact™ Abrasives deliver long life and a consistent finish thanks to an exclusive 3M construction. These discs have unique three-dimensional abrasive structures that expose fresh, sharp mineral as they wear. When used with other 3M™ Trizact™ Abrasives and as part of a 3M™ Perfect-It™ Paint Finishing System, they can reduce overall finishing time.
Typical Properties
Resources
Related Products
| Overall Diameter (Metric) | 75 Millimeter | ||
| Product Form | Disc | ||
| Grit | 8000 | ||
| Attachment Type | Hook & Loop | ||
| Abrasive Material | Silicon Carbide |
3M™ Trizact™ Hookit™ Foam Abrasive 8000 Disc 443SA, 75 mm, 8000, 30804
3M™ Trizact™ Hookit™ Foam Abrasive 3000 Disc 443SA
3M™ Perfect-It™ Random Orbital PolishFor industrial/occupational use only. Not for consumer sale or use.
3M industrial and occupational products are intended, labelled, and packaged for sale to trained industrial and occupational customers for workplace use. Unless specifically stated otherwise on the applicable product packaging or literature, these products are not intended, labelled, or packaged for sale to or use by consumers (e.g., for home, personal, primary or secondary school, recreational/sporting, or other uses not described in the applicable product packaging or literature), and must be selected and used in compliance with applicable health and safety regulations and standards, as well as all product literature, user instructions, warnings, and other limitations, and the user must take any action required under any recall, field action, or other product use notice. Misuse of 3M industrial and occupational products may result in injury, sickness, death, or property damage. For help with product selection and use, consult your on-site safety professional, industrial hygienist, or other subject matter expert.
