3M™ Membrane Switch Spacer Single Coated 7995MP, Transparent, 610 mm x 914 mm, 0.13 mm, 100 sheets per box
3M ID UU001511912
- 5 mil Membrane Switch Single Coated Spacer with 200MP Adhesive. 3 mil clear polyester carrier. 94 lb lay-flat polycoated kraft paper liner.
- Clear polyester carrier brightens overlay and key pads eliminating need for floodcoat. Easy to die-cut and process. Smooth appearance on graphic overlays. Use for steel rule die-cutting and kiss cutting. Use to protect leads, hold domes in place or for building custom spacers.
- Excellent moisture and solvent resistance. Excellent temperature resistance and shear strength. UV resistant. Easy to apply. Not messy. Easily die-cutable. Use for selective die-cutting.
- Use to protect leads, hold domes in place, or for building custom spacers
Specifications
|
Attribute Name
|
Value
|
|---|---|
|
Adhesive Type
|
200MP High Performance Acrylic
|
|
Consumer Label
|
No
|
|
Face-Side Adhesive Thickness
|
0,05 Millimetre
|
|
Face-Side Adhesive Type
|
200MP High Performance Acrylic
|
|
Industries
|
Metalworking, Signage, Specialty Vehicle, Woodworking
|
|
Maximum Operating Temperature (Celsius)
|
204 Degree Celsius
|
|
Overall Length (Metric)
|
914 mm
|
|
Overall Width (Metric)
|
610 mm
|
|
Primary Liner
|
94# Polycoated Kraft Paper
|
|
Primary Liner Color
|
White
|
|
Product Colour
|
Transparent
|
|
Total Tape Thickness without Liner (metric)
|
0,13 Millimetre
|
Product Details
- 5 mil Membrane Switch Single Coated Spacer with 200MP Adhesive. 3 mil clear polyester carrier. 94 lb lay-flat polycoated kraft paper liner.
- Clear polyester carrier brightens overlay and key pads eliminating need for floodcoat. Easy to die-cut and process. Smooth appearance on graphic overlays. Use for steel rule die-cutting and kiss cutting. Use to protect leads, hold domes in place or for building custom spacers.
- Excellent moisture and solvent resistance. Excellent temperature resistance and shear strength. UV resistant. Easy to apply. Not messy. Easily die-cutable. Use for selective die-cutting.
- Use to protect leads, hold domes in place, or for building custom spacers
- Excellent moisture and solvent resistance. Excellent temperature resistance and shear strength. UV resistant. Easy to apply – not messy
- Adhesive resists oozing at slits and die-cuts for faster part processing
- Liner adds dimensional stability for high-speed rotary die-cutting
3M™ Membrane Switch Spacer Single Coated 7995MP is a 2.0 mil 200MP high performance acrylic adhesive on one side of a 3.0 mil white polyester film carrier on a 7 mil 94 lb polycoated kraft paper liner
Used for lead protection, dome retainer sheets, and for priting conductive circuitry. Same characteristics as 3M Single Coated Membrane Switch Spacer 7993MP except with a thicker white polyester film carrier
Resources
