- 175 µm Double linered membrane switch spacer with 200MP adhesive. 58 lb lay-flat polycoated kraft paper liners on each side. Both liners are printed
- Ideal for circuit separation in switches until actuation. Easy to die-cut and process. Use for steel rule die-cutting.
- 3 mil polyester film carrier provides strength and stability
- Adhesive resists oozing at edges and die-cuts for faster part processing
Specifications
|
Attribute Name
|
Value
|
|---|---|
|
Adhesive Type
|
200MP High Performance Acrylic
|
|
Back-Side Adhesive Thickness (metric)
|
0,05 Millimetre
|
|
Back-Side Adhesive Type
|
200MP High Performance Acrylic
|
|
Face-Side Adhesive Thickness (metric)
|
0,055 Millimetre
|
|
Face-Side Adhesive Type
|
200MP High Performance Acrylic
|
|
Indoor/Outdoor
|
Indoor/Outdoor
|
|
Industries
|
Metalworking, Signage, Specialty Vehicle, Woodworking
|
|
Maximum Operating Temperature (Celsius)
|
204 Degree Celsius
|
|
NPVI Mktg
|
Yes
|
|
Overall Length (Metric)
|
914 mm
|
|
Overall Width (Metric)
|
610 mm
|
|
Primary Liner
|
58# Polycoated Kraft Paper
|
|
Primary Liner Color
|
Tan
|
|
Product Colour
|
Transparent
|
|
Secondary Liner
|
58# Polycoated Kraft Paper
|
|
Secondary Liner Color
|
Tan
|
|
Total Tape Thickness without Liner (metric)
|
0,18 Millimetre
|
Product Details
- 175 µm Double linered membrane switch spacer with 200MP adhesive. 58 lb lay-flat polycoated kraft paper liners on each side. Both liners are printed
- Ideal for circuit separation in switches until actuation. Easy to die-cut and process. Use for steel rule die-cutting.
- 3 mil polyester film carrier provides strength and stability
- Adhesive resists oozing at edges and die-cuts for faster part processing
- Layflat 58# polycoated kraft (PCK) liners add dimensional stability for various die-cutting operations
3M™ Membrane Switch Spacer 7957MP is our 50 µm 200MP high performance acrylic adhesive double coated on each side of a 75 µm polyester film carrier. This tape has a double liner of 107 µm 58, lay-flat polycoated kraft paper, and is moisture resistant.
Use 3M™ Membrane Switch Spacer 7957MP for circuit separation in membrane switches until actuation. Our acrylic adhesive is easy to die-cut and process. Ideal for steel rule die-cutting. It’s a high-performance acrylic adhesive, double coated on each side of a polyester film carrier. High shear strength withstand repeat stresses of switch actuation. Same as 3M Membrane Switch Spacer 7945MP with 3.0 mil carrier.
Resources
