3M™ Static Mixing Nozzle is a cascade mix/meter nozzle for an easy squeeze of adhesive right on target. Our static mixing nozzle is engineered for use with 3M cartridges and manual or pneumatic applicators.
Combining convenience and performance, 3M™ Static Mixing Nozzles mix two-part adhesives, sealers and foams to the perfect ratio every time. As the products pass through the plastic tube, the mixing process occurs. When the product dispenses, it is thoroughly mixed, saving automotive technicians from having to manually mix two-part products. These nozzles simplify the mixing process and make clean up easier because there are no mixing and stirring tools needing to be cleaned. Once a product application is finished, leave the nozzle on and allow the mix inside to harden. This serves as a cap for the cartridge. For a new job, replace the old nozzle with a new, fresh one.
3M industrial and occupational products are intended, labelled, and packaged for sale to trained industrial and occupational customers for workplace use. Unless specifically stated otherwise on the applicable product packaging or literature, these products are not intended, labelled, or packaged for sale to or use by consumers (e.g., for home, personal, primary or secondary school, recreational/sporting, or other uses not described in the applicable product packaging or literature), and must be selected and used in compliance with applicable health and safety regulations and standards, as well as all product literature, user instructions, warnings, and other limitations, and the user must take any action required under any recall, field action, or other product use notice. Misuse of 3M industrial and occupational products may result in injury, sickness, death, or property damage. For help with product selection and use, consult your on-site safety professional, industrial hygienist, or other subject matter expert.