3M (East) AG Podružnica Republika Hrvatska

3M™ Betapure™ AU Series Filter Cartridge, AU40C11CA, 40 in, 10 µ, 15/Case

3M ID 70020137926
  • Consistent and reproducible contaminant reduction
  • Rigid Structure reduces cartridge by-pass and unloading to provide consistent filtration from start to finish
  • Excellent reduction of deformable contaminants for consistent effluent
  • Gasket Design reduces by-pass from poor to damaged seals
 Više...
Specifikacije
End Modification
Code 8 Double O-Ring
Filter Material
Polyolefin
Filter Type
Depth
Industries
Industrial
Marka
Betapure™
Micron Rating
30 Absolute, @ 95%
Series
Betapure™ AU Series
Serija proizvoda
AU
Units per Case
15
Detalji o proizvodu
  • Consistent and reproducible contaminant reduction
  • Rigid Structure reduces cartridge by-pass and unloading to provide consistent filtration from start to finish
  • Excellent reduction of deformable contaminants for consistent effluent
  • Gasket Design reduces by-pass from poor to damaged seals
  • Lower Pressure Drop provides long service life while using smaller filter housings

Betapure™ AU series filter cartridges and capsules set the standard for filtration performance. Offering more grades with absolute reduction ratings than competitive filters, the controlled pore size of the Betapure AU series filter matrix allow for absolute distinction between cartridge grades to provide the most accurate and consistent filtration.

Our wide range of media grades allows you to precisely tailor performance characteristics and achieve optimal filtration economy by enabling defined reduction cut-off points by particle size. We manufacture Betapure™ AU Series Filter Cartridges using state-of-the-art technology to produce a clean, rigid, filter structure that generates reproducible effluent consistency. The filter matrix is constructed using long bicomponent fibers, each fiber having an inner core and an outer sheath. Betapure AU series filters are available in two bicomponent fiber structures, polypropylene/polyethylene or polyester/co-polyester, to provide a range of compatibility for your particular process. The Betapure™ AU Series Z11 and Z13 filter is available with a polypropylene media insert and glass paper insert respectively.

In manufacturing the Betapure™ AU Series Filter we combine stringent material quality assurance standards, exacting in-process controls along with extensive final product testing and verification. The results are products that provide consistent filtration from lot-to-lot, filter-to-filter. The bicomponent fibers of the filter matrix are thermally bonded by exploiting the difference in melt temperatures of the two fiber components. Heating the matrix to the melt temperature of the polyethylene sheath, but below that of the polypropylene core causes the fiber-to-fiber bond at every contact point. And the high degree of fiber-to-fiber bonding provides a rigid structure that eliminates the need for a core support along with any possibility of media migration. Standard Betapure AU Series Filters (polypropylene /polypropylene) are constructed of FDA CFR-21 compliant material.

Applications

Coatings

  • High Quality Paint, Film Coatings, Resins, and Ink

Food & Beverage

  • Bottled Water, Pre-Ro, Blend Water, Wash Water

General Industrial

  • Desalination, Plating, Machine Tool Coolant, Process Water

Electronics     

  • Pre-Ro, Wafer Slurries, Ceramic Slurries, Chemical Mechanical Polishing, Cathode Ray Tube Production, Disc Cleaning

Chemical/Petro-Chemical    

  • Process Water, Pre-Ro, Amine, Fine Chemicals

The Rigid Construction Advantage
To meet demanding filtration quality standards in today’s market, absolute ratings will provide you with product consistency, and improve yields.

Our rigid filter structure retains consistent pore size even under severe process conditions. Changes caused by pump fluctuations, stopping and restarting the system, or high differential pressure will have minimal, if any effect on product consistency. Depth filtration reduces deformable contaminants to help eliminate rework or product quality rejection.

Critical to any filtration process is the reduction of filter by-pass. We effectively address this issue by design with our closed-cell polyethylene foam gasket to properly seal the cartridge for applications using knife-edge housing systems.

Minimizing flow restriction can dramatically reduce filtration cost. Lower pressure drops mean increased filter life, product throughput, and permit the use of fewer filters to achieve a given flow vs. differential pressure. When filters are appropriately sized for a specific application they reduce total filtration costs including purchase, installation, and disposal.

Pratite nas
Brandovi navedeni na gornjoj listi predstavljaju robne marke 3M kompanije
Promijenite lokaciju
Hrvatska - hrvatski