• 3M™ Membrane Switch Spacer 7957MP, Transparent, 610 mm x 165 m, 0.18 mm
  • 3M™ Membrane Switch Spacer 7957MP, Transparent, 610 mm x 165 m, 0.18 mm

    3M ID UU001538931
    • 175 µm Double linered membrane switch spacer with 200MP adhesive. 58 lb lay-flat polycoated kraft paper liners on each side. Both liners are printed
    • Ideal for circuit separation in switches until actuation. Easy to die-cut and process. Use for steel rule die-cutting.
    • 3 mil polyester film carrier provides strength and stability
    • Adhesive resists oozing at edges and die-cuts for faster part processing
     More...
    View all details
    Specifications
    Attribute Name
    Value
    Adhesive Type
    200MP High Performance Acrylic
    Back-Side Adhesive Thickness (metric)
    0,05 Millimetre
    Face-Side Adhesive Thickness (metric)
    0,055 Millimetre
    Indoor/Outdoor
    Indoor/Outdoor
    Industries
    Metalworking, Signage, Specialty Vehicle, Woodworking
    Maximum Operating Temperature (Celsius)
    204 Degree Celsius
    NPVI Mktg
    Yes
    Overall Length (Metric)
    165 m
    Overall Width (Metric)
    610 mm
    Primary Liner
    58# Polycoated Kraft Paper
    Product Colour
    Transparent
    Secondary Liner
    58# Polycoated Kraft Paper
    Total Tape Thickness without Liner (metric)
    0,18 Millimetre
    Product Details
    • 175 µm Double linered membrane switch spacer with 200MP adhesive. 58 lb lay-flat polycoated kraft paper liners on each side. Both liners are printed
    • Ideal for circuit separation in switches until actuation. Easy to die-cut and process. Use for steel rule die-cutting.
    • 3 mil polyester film carrier provides strength and stability
    • Adhesive resists oozing at edges and die-cuts for faster part processing
    • Layflat 58# polycoated kraft (PCK) liners add dimensional stability for various die-cutting operations

    3M™ Membrane Switch Spacer 7957MP is our 50 µm 200MP high performance acrylic adhesive double coated on each side of a 75 µm polyester film carrier. This tape has a double liner of 107 µm 58, lay-flat polycoated kraft paper, and is moisture resistant.

    Use 3M™ Membrane Switch Spacer 7957MP for circuit separation in membrane switches until actuation. Our acrylic adhesive is easy to die-cut and process. Ideal for steel rule die-cutting. It’s a high-performance acrylic adhesive, double coated on each side of a polyester film carrier. High shear strength withstand repeat stresses of switch actuation. Same as 3M Membrane Switch Spacer 7945MP with 3.0 mil carrier.