- Non-sag gel
- Slow cure
- Bonds difficult surfaces
- Gel viscosity adhesive is easily applied from the bottle
|
Attribute Name
|
Value
|
|---|---|
|
Adhesive Type
|
Instant Adhesive
|
|
Container Size (Metric)
|
20 Gram
|
|
Full Cure Time
|
24 Hours @ 72 F (22 C)
|
|
Indoor/Outdoor
|
Both
|
|
Industries
|
Construction, Consumer Goods, Electronics, General Industrial, Medical, Metalworking, Military and Government, MRO, Specialty Vehicle, Transportation
|
|
Maximum Operating Temperature (Celsius)
|
82 Degree Celsius
|
|
Net Weight (Metric)
|
20 g
|
|
Physical Form
|
Liquid
|
|
Position
|
Best
|
|
Product Form
|
Tube
|
|
Product Type
|
Instant Adhesive
|
|
Shear Strength
|
2000 Pound_Per_Square_Inch
|
|
Shelf Life in Months (from date of manufacture)
|
9
|
|
Specific Gravity
|
8.9 Pound Per Gallon (US)
|
|
Storage Temperature
|
72 Degree Fahrenheit
|
|
Substrate 1
|
EPDM Rubber, Fabric, Felt, Cork & Fibrous Glass, Flexible Foam (Latex, Urethane), Metal, Paper & Cardboard, Plastic (ABS, PVC, Acrylic), Plastic (Flexible Vinyl), Plastic (High Performance Nylon), Plastic (Polyolefins and Thermoplastic Elastomers), Rigid Foam (Beadboard Styrene), Rigid Foam (Urethane), Rubber (Except EPDM)
|
|
Substrate 2
|
EPDM Rubber, Fabric, Felt, Cork & Fibrous Glass, Flexible Foam (Latex, Urethane), Metal, Paper & Cardboard, Plastic (ABS, PVC, Acrylic), Plastic (Flexible Vinyl), Plastic (High Performance Nylon), Plastic (Polyolefins and Thermoplastic Elastomers), Rigid Foam (Beadboard Styrene), Rigid Foam (Urethane), Rubber (Except EPDM)
|
|
Viscosity
|
Non-sag
|
|
Viscosity Range (cps) at Room Temperature
|
45,000-85,000
|
|
Work Time
|
60-120 Seconds
|
- Non-sag gel
- Slow cure
- Bonds difficult surfaces
- Gel viscosity adhesive is easily applied from the bottle
- Economical to use as it requires only drops of adhesive to provide strong bonds to many metals, plastics, and rubbers
3M™ Scotch-Weld™ Instant Adhesive CA50 Gel is a very high viscosity, surface insensitive instant adhesive.
3M™ Scotch-Weld™ Instant Adhesive CA50 Gel has a consistency that allows it to be used in many non-sag vertical applications, and to fill gaps up to .020 inches. Its very slow cure rate allows maximum time to reposition parts.
Pošaljite nam poruku
Zahvaljujemo na interesu za 3M. Kako biste nam pomogli da učinkovito upravljamo Vašim upitom i odgovorimo na njega, ljubazno Vas molimo da navedete neke ključne podatke, uključujući Vaše podatke za kontakt. Podaci koje navedete služiti će kako bismo mogli odgovoriti na Vaš zahtjev putem e-pošte ili telefona od strane predstavnika tvrtke 3M ili jednog od naših ovlaštenih poslovnih partnera s kojima bismo mogli podijeliti Vaše osobne podatke, a u skladu s pravilima privatnosti tvrtke 3M.
Hvala vam što ste se obratili tvrtki 3M
Primili smo poruku i trenutno analiziramo vaš upit
Netko od naših predstavnika stupit će s vama u kontakt putem telefona ili e-pošte
An error occurred.
