1. Hrvatska
  2. All 3M Products
  3. Tapes
  4. Flexographic Plate Mounting Tapes
  5. 3M™ Cushion-Mount™ Plus Plate Mounting Tape E1115H, Tan, 457 mm x 23 m, 0.38 mm

3M™ Cushion-Mount™ Plus Plate Mounting Tape E1115H, Tan, 457 mm x 23 m, 0.38 mm

3M ID YP208011038
  • Tan, flexo plate mounting tape has air release feature with high plate side adhesion
  • 0.38 mm thickness
  • Tan foam color indicates the process printing density foam
  • Securely bonds the flexographic photopolymer plate to the print sleeve or steel cylinder to prevent plate edge lifting during printing
 More...
View all details
Specifications
Attribute Name
Value
Adhesive Type
Differential Acrylate
Air Release
Yes
Applications
Flexographic Plate Mounting
Backing Material
Polyethylene Foam
Backing Thickness (metric)
0,432 Millimetre
Composite Sleeves
No
Overall Length (Metric)
23 m
Overall Width (Metric)
457 mm
Primary Liner
Polycoated Polyester
Print Quality
Process Printing
Print Quality (Series)
11 Series
Product Colour
Tan
Total Tape Thickness without Liner (metric)
0,43 Millimetre
Urethane Sleeves
Yes
Product Details
  • Tan, flexo plate mounting tape has air release feature with high plate side adhesion
  • 0.38 mm thickness
  • Tan foam color indicates the process printing density foam
  • Securely bonds the flexographic photopolymer plate to the print sleeve or steel cylinder to prevent plate edge lifting during printing
  • Has higher plate side adhesion for challenging print conditions that use thick plates or small print sleeves
  • Print plates mounted on E1115H will have no air bubbles under the plate due to the air release feature designed into the tape
  • Grooves in the adhesive are created by a cross-hatch pattern from the release liner
  • Plate demounts from the double coated cushioned tape without adhesive residue
  • Tape also removes cleanly from the sleeve or steel print cylinder
  • Flexographic printing, flexographic printers
  • Cushioned flexographic plate mounting sticky back foam tape

Mount your photopolymer plate to print cylinders with 3M™ Cushion-Mount™ Plus Plate Mounting Tape E1115H. Our 0.38 mm tan, double coated foam tape has the air release feature with high plate side adhesion. It is used for high quality process printing.

3M™ Cushion-Mount™ Plus Plate Mounting Tape E1115H with easy mount adhesive and higher plate side adhesive is created for mounting flexographic print plates to cylinders or sleeves. It provides high quality tone reproduction where process printing is important. Our Easy Mount liner creates micro-channels in both adhesive surfaces. The crosshatched pattern creates a continuous and permanent network of micro-channels in the adhesive, allowing air to escape from between the tape and cylinder/sleeve and between the tape and plate. The adhesive on the linered side (plate side) of the tape is designed for mounting photopolymer plates, has excellent holding power on-press and clean plate removal when demounting. The adhesive on the non-linered side (cylinder side) of the tape is designed for mounting to flexographic printing cylinders or sleeves, providing easy application when mounting and clean removability while demounting.