1. Hrvatska
  2. All 3M Products
  3. Abrasives
  4. Wheels
  5. Deburring & Finishing Wheels
  6. Scotch-Brite™ EX3 Deburring Wheel X3-WL, 150 mm x 12.7 mm x 25.4 mm, 9S FIN

Scotch-Brite™ EX3 Deburring Wheel X3-WL, 150 mm x 12.7 mm x 25.4 mm, 9S FIN

3M ID 61500177151
  • Convolute construction provides a balanced, smooth running wheel
  • Specially engineered to condition sharp edges and metal burrs
  • Convolute construction provides a balanced, smooth running wheel throughout product life
  • Non-woven web runs cool and lessens impact on heat-sensitive materials
 More...
View all details
Specifications
Attribute Name
Value
Attachment Type
Center Hole
Brand
Scotch-Brite™
Center Hole Diameter (Metric)
25,4 Millimetre
Form Type
Convolute/Deburring
Grade
Fine
Max Speed
6000 rpm
Mineral Type
Silicon Carbide
Product Form
Wheel
Size
150mm x 12mm x 25.4mm
Product Details
  • Convolute construction provides a balanced, smooth running wheel
  • Specially engineered to condition sharp edges and metal burrs
  • Convolute construction provides a balanced, smooth running wheel throughout product life
  • Non-woven web runs cool and lessens impact on heat-sensitive materials
  • Unique resin system produces less smearing, reducing clean and prep time

Scotch-Brite™ EX3 Deburring Wheel is a convolute-constructed, hard, durable deburring wheel suited for applications where edge retention is a must. Our wheels perform best when consistently presented with a sharp edge or metal burrs.

Scotch-Brite™ EX3 is an effective wheel to deburr, blend, finish and polish edges on glass, hard and soft composites, and metals such as builder's hardware, medical instruments, metal fabrication, metal implants, plumbing fixtures, and turbine engines. Because of its hard density, we do not recommend the EX3 for applications where conformability and finishing of flat surfaces are required.

Scotch-Brite™ EX3 Deburring Wheel is available with silicon carbide or aluminum oxide abrasive mineral. Silicon carbide is a synthetic mineral that is very sharp and commonly used for low-pressure applications such as paint prep and finishing. Aluminum oxide is a hard, blocky mineral that provides high cut-rate and long life. While silicon carbide breaks down faster than aluminum oxide, it produces a finer finish.

Our Scotch-Brite™ industrial abrasives are unique surface conditioning products with abrasives incorporated into non-woven nylon or synthetic fibers. Combining abrasives with the fibers creates an abrasive system that delivers consistent results for the life of the product. The open-web material runs cool and is load resistant, which keeps the abrasive minerals cutting at high performance by limiting clogging of the fibers.