3M™ Cushion-Mount™ Plus Plate Mounting Tape E1515H, Purple, 1372 mm x 23 m, 0.38 mm

• Purple, flexo plate mounting tape with air release feature with high plate side adhesion
• This 0.015 inch (0.38 mm) purple, double coated foam tape has the air release feature with high plate side adhesion used to mount flexographic print plates.
• Provides high quality medium combination print. The adhesives remove cleanly from the print plate and the print cylinder.
• Consistent caliper control allows the printer to use multiple foam densities on a print job to optimise print quality
• Easy Mount liner, has micro-channels in both adhesive surfaces. The crosshatched pattern allows air to escape from between the tape and cylinder/sleeve and between the tape and plate. The productivity is increased, total handling time is reduced and printing defects are eliminated
• Higher plate side adhesion meets challenging print conditions using thick plates or small print sleeves
• Cross-hatch pattern in release liner creates grooves in adhesive to help release air
• Plate demounts from the tape without adhesive residue
• Tape removes cleanly from sleeves or steel print cylinders
• For flexographic printing, flexographic printers
• Cushioned flexographic plate mounting sticky back foam tape

This 0.015 inch (0.38 mm) purple, double coated foam tape has the air release feature with high plate side adhesion used to mount flexographic print plates.

Provides high quality medium combination print. The adhesives remove cleanly from the print plate and the print cylinder.